EZstrip Cake Pump
The EZstrip™ Cake Pump features a specially designed feed chamber that can easily be disconnected allowing access to the rotating assembly. The rotor can be separated from the conveyor allowing removal of the rotor and stator all within its own assembled length. This process can take as little as 6 minutes!
The Description of EZstrip Cake Pump
The MONO EZstrip™ cake pump features a specially designed feed chamber which is easily disconnected allowing access to the rotor and screw conveyor assembly. The rotor can then be separated from the conveyor allowing removal of the rotor and stator while in-situ, without disconnecting suction and delivery pipework.
This process can take as little as 6 minutes. Imagine the time savings you could achieve when maintaining an EZstrip cake pump.
Following the successful launch of the revolutionary EZstrip progressing cavity pump, Mono has developed the EZstrip Cake Pump to make the process of maintaining a cake pump easy.
Typical Applications
- Heavy clay slurries
- Gypsum
- Grout
- Grape must
- Municipal GBT sludge
- Thick industrial sludge
- Sludge cake up to 40% dry solids
- Content
- Sludge blending, including lime
- Powder dosing and lime slurry
- Dosing in conjunction with barrier layer injection
| Thickened sludge cake (up to 40% dry solids content) | Dewatered sludge |
| Sludge blending | Lime powder dosing |
| Lime slurry dosing | Barrier layer injection |
The Features of EZstrip Cake Pump
- Quick and easy to maintain-in-place
- Reduced maintenance downtime and labor savings
- No need to disconnect suction and discharge pipework, even when removing the screw conveyor
- Detachable feed chamber supplied as standard
- Side inlet port allows addition of thin sludge for blending and can also be used for draining the pump
- Large auger design as standard – ribbon auger available to assist blending/conveying of product into the pump
- Option of a separate bridge breaker mounted directly on top of the hopper to ensure optimum filling of the auger feed screw
People Also Ask
Fill up and submit the below inquiry form, or directly write us an email: info@pumpvv.com
