nm148by01l06b

Parameters Table

BrandNetzschWeight200kg
ModelNM148BY01L06BShaft power11
Flow rate40-160(m3/h)Speed280(rpm)
Suction port200mmEfficiency98%
Discharge port200mmPower40kW
Lift60mMaterialStainless steel

nm148by01l06b Applicable industries

Chemical industry:
Transportation during chemical reactions
Handling of corrosive media
Transportation of high-viscosity liquids

Papermaking industry:
Transportation of slurries
Transportation of chemicals
Transportation of fillers and additives

Food and beverage processing:
Transportation of pasty materials
Transportation of high-viscosity liquids such as syrups, jams, etc.
Transportation of slurries and muds

Environmental protection:
Transportation of sludge and slurries
Addition of chemical agents
Transportation in dehydration or concentration systems

Mining and excavation:
Transportation of slurries and slurries
Handling of high-concentration solid-liquid mixtures

nm148by01l06b

In summary, Netzsch NM148BY01L06B is widely used in many industrial fields such as chemical industry, papermaking, food and beverage with its excellent performance and wide applicability. With its excellent corrosion resistance, self-priming ability and conveying stability, NM148B can play an important role in various harsh working conditions and is deeply favored by the industry.

People also ask

A screw pump is a type of rotary pump which is equipped with screws that mesh together and rotate within a cylindrical cavity or liner. The fluid enters from the suction side of the pump and moves linearly along with these intermeshing screws to the discharge side of the pump.

Thus the screw of a screw compressor is asymmetrical along its length, while a screw pump is symmetrical all the way. The gas compression process of a rotary screw is a continuous sweeping motion, so there is very little pulsation or surging of flow, as occurs with piston compressors.

Screw pump parts are inherently self-priming whereas Centrifugal pumps would require a priming system, foot valve or self-priming casing design. For clarity, a centrifugal pump with a helicoidal screw impeller should not be confused with a screw pump.

Fill up and submit the below inquiry form, or directly write us an email: info@pumpvv.com

Similar Posts

  • NM063BY02S12B Stator

    Byroot

    Stator design: The stator is made of highly wear-resistant polyurethaneThe stator has excellent sealing performance to prevent leakage and contaminationThe inner wall of the stator is smooth, which is conducive to unimpeded fluid transportation The metal stator with uniform wall thickness is formed with high precision by removing the lining rubber on the basis of…

  • NM125BY01L06B

    Byroot

    NM125BY01L06B Parameters Brand NETZSCH Shaft Power 11 Model NM125BY01L06B Suction Diameter 200mm Speed 280(rpm) Discharge Diameter 200mm Weight 200kg Efficiency 98% Power 30kW Pump Shaft Position Horizontal Drive Electric Material Stainless Steel Lift 60m NM125BY01L06B Applications Environmental protection: transportation of industrial sewage, domestic sewage, muddy water containing solid particles and short fibers. Especially suitable for…

  • NM063BY02S12B Rotor

    Byroot

    Rotor design: The manufacturing process of the rotor is very precise, and the gap between the rotor and the stator is controlled within a range of only tens of microns. This extreme dimensional accuracy not only effectively reduces leakage and backflow losses, but also ensures the high efficiency of the pump. The rotor is made…

  • NM015BY01L06B

    Byroot

    NM015BY01L06B is a widely used screw pump. The design of its core components, the stator and rotor, is the key to the pump performance. Stator: The Netzsch NM015BY01L06B stator uses high-quality insulating materials to ensure stable and reliable motor operation.The stator winding is precisely arranged to ensure high current transmission efficiency and reduce energy loss.Rotor:…