Netzsch NM021by01l06b

Netzsch NM021by01l06b-1
Netzsch NM021by01l06b

Netzsch NM021by01l06b

  • The Netzsch NM021by01l06b connecting Rod Group is an important Netzsch pump parts, comprising connecting rod, universal joint, coupling rod, guide bush, rubber rings, and a rubber sheath, connecting rod pin, retaining sleeve, steel wire rings, drive shaft, etc.
  • The connecting Rod Group must withstand both the force of the drive shaft and its own swinging longitudinal and transverse forces. These forces are cyclical and cause the connecting rods to be subjected to alternating loads such as compression and stretching, which can cause fatigue failure. Therefore, it’s crucial for Netzsch pump parts, especially the coupling rod, to have sufficient fatigue strength and structural stiffness. Otherwise, insufficient fatigue strength can lead to breakage of the connecting rod body or interface, resulting in major accidents and damage to the whole machine.

Netzsch NM021by01l06b function of connecting rod:

  • High-quality construction: The Netzsch NM021by01l06b is built with high-quality materials to ensure durability and longevity.
  • Compact design: This device is designed to be small and compact, making it easy to install in tight spaces.
  • Low noise operation: The Netzsch NM021by01l06b operates quietly, making it suitable for use in environments where noise levels must be kept to a minimum.
  • Efficient performance: With a maximum flow rate of 17 liters per minute, this pump delivers efficient performance for a wide range of applications.
  • Easy maintenance: The Netzsch NM021by01l06b is designed for easy maintenance, with simple access to all components and easy-to-replace parts.Wide temperature range: This device can operate in temperatures ranging from -20°C to 90°C, making it suitable for use in a variety of environments.
  • Chemical resistance: The Netzsch NM021by01l06b is resistant to a wide range of chemicals, making it suitable for use in demanding applications.

Netzsch NM021by01l06b Parameter Liat

BRANDNetzsch
INLET/OUTLET CONNECTION TYPENPT
INLET SIZE1-1/4 in
MATERIAL – HOUSING316 SS
MOTOR VOLTAGE230-460 VAC
HORSEPOWER1
progressive cavity pump netzsch nm021by01l06b manual/netzsch pumps/netzsch pumps parts

PMV offers screw pump, Screw pump accessories, and the global solution of the fluid system product.

The product range summary of PMV

Progressive cavity pumps for conveying and metering low to highly viscous media with or without solids

Macerators for macerating solid and fibrous components in the medium

Control systems for monitoring, regulating and controlling processes

Services: consulting, commissioning, maintenance, NETZSCH ,SEEPEX, and MONO Universal Spare parts, repairs and various service contracts

Yes, this is our specialty, we customize different design and material combinations for each application’s modular system. This means that we develop the best technology and the most economical solution for your needs.

Yes, PMV screw pumps and spare parts as well as other brands (NETZSCH,SEEPEX.MONO) Universal accessories can be ordered online. For order please contact us.

progressive cavity pump diagram1
progressive cavity pump diagram

People also ask :

The progressive cavity pumps, also known as a helical rotor pump or a single screw pump, operates based on the principle of positive displacement. It consists of a helical rotor that rotates within a stator with a similar helical profile. As the rotor turns, it creates cavities that move fluid along the axis of the pump from the suction port to the discharge port. The tight fit between the rotor and stator allows for a continuous flow of fluid without any slipping or pulsation. This results in a steady, low-shear flow that is ideal for pumping viscous fluids or those containing solids.cavity pump principle

It is widely used in industries such as food, chemical, pharmaceutical, sewage treatment systems for quantitative dosing, electronics, batteries, energy, cosmetics, and especially in highly automated professional metering and coating systems. Examples include lithium battery coating, automotive sealing and gluing, laboratory slurries, drug mixing and proportioning, drug metering and filling, solar cell panel coating with conductive paint, and glue dispensing in the electronics industry.

A progressing cavity pump is a type of positive displacement pump that uses a rotating screw-like element called a rotor to move fluid through the pump. The rotor rotates eccentrically within a rubber or elastomer stator, creating cavities that progress from one end of the pump to the other and thereby moving the fluid along. These pumps are often used in applications where a consistent flow rate, high viscosity liquids, or solids-laden fluids need to be moved.

Progressive cavity pumps are used in various industries for handling viscous fluids and solids. They are commonly used in industries such as food and beverage, chemical, oil and gas, wastewater treatment, mining, and construction.

To size a progressive cavity pump, you need to consider factors such as the required flow rate, viscosity of the fluid being pumped, operating pressure, and the characteristics of the pump itself.

To minimize damage to the progressive cavity pump stator, you can ensure proper lubrication, monitor operating conditions, avoid abrasive materials, implement preventive maintenance, and ensure correct installation.

[video_lightbox_youtube video_id=”JWkoODah0vY&rel=0″ width=”640″ height=”480″ alt=”Sludge Screw Pump” anchor=”https://pumpvv.com/wp-content/uploads/2023/03/pump-cover1.png”]

Fill up and submit the below inquiry form, or directly write us an email: info@pumpvv.com

Similar Posts

  • BN2-12L seepex BN

    Byroot

    Parameters Key components: stator and rotor The core components of the BN2-12L pump are the stator and rotor. The BN2-12L stator is spiral-shaped and has a rubber lining inside. The BN2-12L rotor consists of two gears that rotate in the stator cavity with precision. When the pump is running, the rotor gears will bite the…

  • BN52-12L seepex BN

    Byroot

    Technical parameters Pump shaft position: Horizontal Suction diameter: DN100 (mm) Power: 7.5kW Model: BN52-12 Conveying medium: Clean water pump Speed: 276 (rpm) Weight: 100kg Material: Cast iron Performance: Wear-resistant Lift: 60m Output flow: 200 Application: Chemical pump Drive mode: Electric Flow rate: 10-60 (m3/h) Efficiency: 98% Working temperature: Normal temperature Brand: SEEPEX Number of impellers:…

  • BN70-12L stator seepex

    Byroot

    Design features The seepex BN70-12L stator adopts an innovative design concept and is unique in terms of material selection, manufacturing process and structural optimization: Optimized material selection: High-quality insulating materials with high wear resistance and chemical corrosion resistance are used to ensure that the stator can perform stably and reliably under harsh working conditions. Advanced…

  • Oberdorfer 101 Progressive Cavity Pump

    Byroot

    Progressive cavity pumps are essential tools in various industries, and the Oberdorfer 101 model stands out for its reliability and efficiency. This article explores the key features, applications, and advantages of the Oberdorfer 101 progressive cavity pump. Key Features The Oberdorfer 101 progressive cavity pump is designed with several notable features that enhance its performance:…

  • BN130-12L rotor seepex

    Byroot

    Material selection Corrosion-resistant materials The material selection of the BN130-12L rotor is very particular, and usually uses a corrosion-resistant alloy material. This material can not only resist the erosion of chemical substances, but also operate stably under high temperature and high pressure environments, extending the service life of the equipment. Balance of strength and toughness…

  • Multiphase Progressive Cavity Pump

    Byroot

    Introduction The multiphase progressive cavity pump is an innovative solution commonly used in various industries, particularly in oil and gas extraction. This type of pump is designed to handle multiple phases of fluid, including liquids, gases, and solids, making it versatile and efficient for challenging applications. Working Principle The function of a multiphase progressive cavity…