NM076BY01L06B Netzsch

Product Overview:

NM076BY01L06B belongs to the standard high-pressure screw pump series NM series of NETZSCH.The rated flow rate is 76 L/min, suitable for the delivery of medium and high viscosity liquids.The direct-connection design is adopted, and the motor and pump body are directly connected on the same axis through the coupling.


Compact structure, easy installation and maintenance.
High energy transfer efficiency, smooth operation and relatively low noise.
The pump body is made of cast iron, suitable for chemical, pharmaceutical, food and other industrial fields.
Standard 6.0 kW motor power provides sufficient driving power.

NM076BY01L06B Netzsch


Widely used in the transportation of liquids with high viscosity, such as various chemical raw materials, lubricating greases, slurries, etc.
Suitable for liquid transportation and circulation in industrial occasions such as factories, equipment, pipelines, etc.

NM076BY01L06B Netzsch
Rated flow76 L/minOverall sizeabout 800 x 400 x 500 mm
Maximum working pressure16 barFlow40 m3/h
Motor power6.0 kWSpeed300 rpm
Inlet and outlet interface specificationsDN65Discharge pressure0.4 Mpa
Pump body materialcast ironMaterialstainless steel
NM076BY01L06B

People also ask

NM076BY01L06B screw pump can transport liquids with a viscosity below 1000 mPa·s, which can meet the needs of most chemical and pharmaceutical industries.

Regularly check the status of mechanical seals and bearings, and replace worn parts in time. At the same time, keep the inside of the pump clean to prevent impurities from entering and affecting operation.

  1. Rod breakage
  2. Pump leakage
  3. Stator swelling
  4. Stator detachment
  5. Pipe leakage