Moyno EZstrip Cake Progressive Cavity Pump

Home » Uncategorized » Moyno EZstrip Cake Progressive Cavity Pump

EZstrip Cake Pump

The EZstrip™ Cake Pump features a specially designed feed chamber that can easily be disconnected allowing access to the rotating assembly. The rotor can be separated from the conveyor allowing removal of the rotor and stator all within its own assembled length. This process can take as little as 6 minutes!

The Description of EZstrip Cake Pump

The MONO EZstrip™ cake pump features a specially designed feed chamber which is easily disconnected allowing access to the rotor and screw conveyor assembly. The rotor can then be separated from the conveyor allowing removal of the rotor and stator while in-situ, without disconnecting suction and delivery pipework.

This process can take as little as 6 minutes. Imagine the time savings you could achieve when maintaining an EZstrip cake pump.

Following the successful launch of the revolutionary EZstrip progressing cavity pump, Mono has developed the EZstrip Cake Pump to make the process of maintaining a cake pump easy.

Typical Applications

Heavy clay slurries
Gypsum
Grout
Grape must
Municipal GBT sludge
Thick industrial sludge
Sludge cake up to 40% dry solids
Content
Sludge blending, including lime
Powder dosing and lime slurry
Dosing in conjunction with barrier layer injection

Thickened sludge cake (up to 40% dry solids content)	Dewatered sludge
Sludge blending	Lime powder dosing
Lime slurry dosing	Barrier layer injection

The Features of EZstrip Cake Pump

Quick and easy to maintain-in-place
Reduced maintenance downtime and labor savings
No need to disconnect suction and discharge pipework, even when removing the screw conveyor
Detachable feed chamber supplied as standard
Side inlet port allows addition of thin sludge for blending and can also be used for draining the pump
Large auger design as standard – ribbon auger available to assist blending/conveying of product into the pump
Option of a separate bridge breaker mounted directly on top of the hopper to ensure optimum filling of the auger feed screw