MOYNO Model 2000 HS Large Screw Pumps

Home » Uncategorized » MOYNO Model 2000 HS Large Screw Pumps

2000 HS Large Screw Pumps

The 2000 HS System combines high pump efficiency with low discharge pressure to provide unmatched performance in high solids sludge cake transfer. Compared to hydraulically driven, piston ram type pumps and open conveyors, the 2000 HS System requires a much lower capital investment, lower operating costs and less maintenance.

The 2000 HS System combines high pump efficiency with low discharge pressure to provide unmatched performance in high solids sludge cake transfer. Compared to hydraulically driven, piston ram type pumps and open conveyors, the 2000 HS System requires a much lower capital investment, lower operating costs and less maintenance.

Fluid Type

High-viscosity and high-solids

Fluid Supply

Via suction hopper of Twin Screw Feeder (TSF) and chutes
Capable of varying TSF length to match wide feed areas from centrifuges and 1 through 2-meter length belt filter presses

Benefits (Twin Screw Feeder)

Capable of varying auger sizes without changing pump arrangement to match the width of the TSF opening to the drop zone
Concentric rotation in a close tolerance pressure tube allows the TSF to generate positive stuffing pressure to the pump inlet (normally between 10 to 30 PSI at the pump inlet)
Dual augers counter-rotate to create a pull-down effect with the product
Intermeshing augers provide self-cleaning action so product will not stick to the augers and fill in the flights
Sidewalls are completely vertical into the augers, which does not allow product to bridge
Close tolerance to sidewalls eliminates product ledge where bridging can gain a foothold
TSF can be run at separate RPM from the pump, allowing control over the amount of stuffing pressure

Benefits (G4 Pump)

Universal joint is out of flow path for unobstructed flow to pump cavity inlet
Wide sweep pump inlet to lower friction loss
Patented auger feed on rotor head stuffs product directly into the cavity without obstruction

Fluid	slurry
Operation	with electric motor
Technology	2 screws
Mobility	stationary
Domain	industrial, for the chemical industry, for wastewater treatment
Applications	transfer, discharge, control, feed, conveying
Fluid specification	for solids-laden fluids, for high-viscosity fluids
Other characteristics	suction, high-efficiency, horizontal mount, vertical
Flow	Min.: 0 us gal/min (0 l/min) Max.: 4,500 us gal/min (17,034.35303 l/min)
Pressure	Min.: 0 psi Max.: 1,500 psi

2 screws pump 2000 HS — **moyno 2000 series pump**